Hms 1&2 Scrap | Used Rails

Specification of Used Rail R50/R65:
Used Rail - GOST R-50-R65
R50 (51.72 Kg / Meter) GOST 7173-55
R65 (64.72 Kg/Meter) COST 8161-75

Chemical Composition of the steel scrap is of international standard as follow:
MN: 0.60 1.05; C: 0.54 0.82; Sl: 0.18 - 0.12; S: 0.04 Max; P: 0.035 max.

MOQ contact: Used rails R50-r65 15,000mt x 12 months
MOQ contact: HMS1/2 15,000mt x 12 months

We are importers for used hms1/2 rail scarp . We can import and ship world wide. Our payment terms is 100% lc at sight . We can ship cif/fob destination port .

SPECIFICATIONS:

the following Percentage Points:

Chemical Composition

Carbon - 0.54 to 0.82%

Phosphorus - 0.035% max

Manganese - 0.60 to 1.05%

As. - 0,01max of Mass share

Silicone - 0.18 to 0.40%

Sulphur - 0.035% max

Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75

The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m)

Used Rails shall be considered free of alloys when the residual alloying elements do not exceed

Cut to 1.5 meter length (standard)



1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

Heavy Melting Steel (HMS):
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density.

The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods.

Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale

HMS 1&2 is produced from various sources and clean and clear material

Product origin : Multiple Origin

Key Specifications/Special Features :

HMS 1&2 scrap is available as per buyers requirement with multiple options. supply available to any part of the world. Material is free from rediation and clean, clear and acceptable anywhere.

Minimum Order Size and Packgaing details

MOQ: 25 Ton

Packaging: Bulk

Hms 1, hms 1&2, used rail
We're the representative of american steel scrap seller group. We sell all metal scrap. Original products are in america so you can trust in quality and price. We sell 30, 000 mt per shipment at least.

Bulk

Product Name : Metal Scrap Specifications : Used Rail and HMS 1&2 Steel Scrap, Iron Scrap HMS 1&2- MT Used Rail-

We can supply you with HMS scraps, HMS 1, HMS 1/2, Used rails scraps.

Specification and Quotation

Chemical Composition:

C: 0.06 - 0.082%
Mn: 0.75 - 1.05%
SI: 0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%

- HMS1 and HMS2 are normally sold together with a ratio of 80/20 (or similar) depending on the price and weight;
- Cutting: 1 - 5 meters; 6 - 12 meters (or other cuts).

R50- R65 - IRSI CODES;
The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65

Chemical Composition Used Rails;

C: 0, 54 - 0,82
Si: 0,18-0,40

Mn: 0, 60-1, 05

S: 0.04 max

P: 0,035 max

As.: 0, 01 max of Mass share

Norms: R-50 GOST7173-75 and R-65 GOST-8165-75

The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m)

Used Rail ISRI 27-29 ISRI-CODES;

(27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.



(28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under.



(28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under.



(28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under.



(29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind.



The rails can be cut to the length the buyer wants